Color Kinetics LL011L360WW120000, Руководство по обслуживанию

Страница: 3 / 42

Introduction Maintenance Guide
3
This document describes the maintenance requirements for the Luminous
Textile. Most maintenance can be performed by local specialists. During
maintenance, the Luminous Textile fragile cloth must be handled carefully, as
well as the electronic parts that must be protected against ESD discharges.
1.1 Abbreviations
• ESD: Electro-Static Discharge
• LAN: Local Area Network
• PCB: Printed Circuit Board
• PSU: Power Supply Unit
• RMA: Return Material Authorization
1.2 Information
To order replacement parts it is important to always provide the serial
number of the part that must be replaced.
1.2.1 Replacement policy
Products produced before 2015 week 48 must be upgraded with
the following components in case of RGB Light Engine and/or other
electrical failures:
• Replace all RGB light engines
• Cables
• Driver box
In case product is produced after 2015 week 48, the RGB Light Engines, driver
box, PSU, player PCB, or SD card can be replaced independently.
If the product is produced after 2019 week 33, the product contains the
latest version of the RBG Light Engines. The replacement part for products
produced after 201933 is xxxxxx V2. If the product is produced before 2019
week 33 and after 205 week 48, order RGB Light Engines of type xxxxxx V1.
In case of fabric replacement, do not only replace front fabric, but also
replace the diffuser fabric (two layers of fabric in total).
If the product is produced after 2019 week 22, the diffuser fabric is 20 mm
longer. This is for easy fabric re-stretching if required.
Follow this link to order spare parts: https://share.lighting.com/sites/
TS1004021225472080427802/SitePages/Search%20results.aspx?Search=LTP
In case support is required contact the local Signify representative. Have the
label information as given in section
2.2 available.
1 Introduction
1