Color Kinetics LL011L360WW120000, Руководство по обслуживанию

Страница: 19 / 42

Repair Maintenance Guide
19
4 Repair
4
Keep the following in mind when performing repairs:
• Maintain a clean work area.
• The working area must be flat. The Luminous Textile can be damaged
when put on stands only.
• Use new white gloves when handling the Luminous Textile.
• Handle the Luminous Textile with care.
• Do not put any pressure on the textile.
• To protect the textile, remove sharp objects from the work area.
• The power must be disconnected during replacement of components
or modules.
• All built-in ICs and many other semiconductors are susceptible to ESD
damage. Take all required measures to prevent electrostatic discharges.
• Always disconnect a Luminous Textile from the mains before repair.
• Use only certified replacement components. Other components may
damage the system and void the warranty. Signify accepts no liability in the
event of such damage.
Figure 20, Luminous Textile repair position
Safety regulations require that after a repair the Luminous Textile must
be completely reassembled, in the original condition. Pay attention to the
following points:
• Route the wire harnesses correctly and secure them in place with the
mounted cable clamps and/or tie-wraps.
• Check for damage to the mains/AC power cable.