1.
1.
1.
1. Un
Un
Un
Unpacking
packing
packing
packing
Thank you for choosing Color Imagination’s Quad-C LED Moving Wash Pro
. For your own safety, please read this manual before installing the device. This
manual covers the important information on installation and applications. Please
install and operate the fixture with following instructions. Meanwhile, please keep
this manual well for future needs.
Color Imagination’s Quad-C LED Moving Wash Pro is made of a new type of
high temperature strength of engineering plastics and cast aluminum casing with
nice outlook. The fixture is designed and manufactured strictly following CE
standards, complying with international standard DMX512 protocol. It’s available
independently controlled and linkable with each other for operation. And it is
applicable for large-scale live performances, theater, studio, nightclubs and discos.
SI-055 adopts 36PCS CREE 10W 4-in-1 LED lamps which features high
brightness and stability. Please carefully unpack it when you receive the fixture and
check whether it is damaged during the transportation. And please check whether
the following items are included inside the box:
Moving Head------- one
Signal Cable----one
Omega Clamp------one
User Manual----one
Power Cable--------one
Safety Chain----one
10.
10.
10.
10. Maintenance
Maintenance
Maintenance
Maintenance and
and
and
and Cleaning
Cleaning
Cleaning
Cleaning
The following points have to be considered during the inspection:
1) All screws for installing the devices or parts of the device have to be tightly
connected and must not be corroded.
2) There must not be any deformations on the housing, color lenses, fixations and
installation spots (ceiling, suspension, trussing).
3
）
Mechanically moved parts must not show any traces of wearing and must not
rotate with unbalances.
4
）
The electric power supply cables must not show any damage, material fatigue or
sediments.
Further instructions depending on the installation spot and usage have to be adhered
by a skilled installer and any safety problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a
regular cleaning to the lights.
1) Clean the inside and outside lens each week to avoid the weakneness of the
lights due to accumulation of dust.
2) Clean the fan each week.
3) A detailed electric check by approved electrical engineer each three month,
make sure that the circuit contacts are in good condition,
prevent the poor
contact of circuit from overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth.
Never use alcohol or solvents.
There are no serviceable parts inside the device. Please refer to the instructions
under “Installation instructions”.
Should you need any spare parts, please order genuine parts from your
local dealer.