37
Appendix B
Quick Commands
Layer property list
• Materials
: The material being applied during the deposition process. This entry
turns to “Custom” if the Density or Z-Factor is modified by the user.
•
Density [g/cm^3]
: The density of the selected material being applied.
•
Z-Factor
: Acoustic impedance factor which is used to compensate for dense
materials and is predefined based on the selected material.
• Tooling [%]
: The geometric relationship between the substrate and the
positioning of the sensor.
Changing the material for a layer
1. In the Program screen, select the layer with the material to be changed.
2. Double-click on the Material row.
3. In the new window select a new material.
4. Click OK.
Note
: When editing Density or Z-Factor, the material value defaults to Custom to prevent
contradictions from occurring between the material and the material values.
Removing a Layer
1. Press the Program button in the Screen Selection tool bar.
2. From the process list, select the Process with the layer that needs to be
removed.
3. In the Process Layers, list select the layer that needs to be removed.
4. Press Remove directly beneath the Process Layers list.
Note
: Removing the layer only removes the layer from the Process Layers list. The layer
can be re-added to the list by pressing “New” and selecting the layer from the
dropdown menu. See “Adding a Process” on the first page of this appendix.
Deleting a Layer
1. Press the Program button on Screen Selection tool bar to enter the Program
screen.
2. Select a process that contains the layer to be deleted.
3. After selecting the Layer from the Process Layers list, press Permarnently
Delete Layer to delete the layer.
Warning
: This action will permanently delete the layer from ALL processes. The layer will
also be deleted from the list of layers. There is no way to recover a layer once
it is deleted.
