Collomix Service Instruction
2018-08-06 Seite 2/3
2.
Work procedure
2.1
Adjustment at the loading shelf
On the loading shelf, the parallelism of the door to the
loading shelf and the cover can at the top be adjusted.
To do this, slightly loosen the four screws and slide the
loading shelf to the left or right to find the best possible
position of the door.
The distance above and below should be about the same.
2.2
Adjustment at the door lock
The actuator should be aligned centrally in the door
switch.
Loosen both screws slightly and position actuator up or
down.
