Collex Communication Corp.
Proprietary and Confidential
6
Turning the BTC-01 on and off
If you want to turn the BTC-01 on, please press the volume button, at the
same time, you hear a hint sounds “ti-ti-”. To turn the BTC-01 off, please
press and hold the volume button for 2~3 seconds till you hear 3 hint sounds
“ti-ti-ti-”.
Pairing your BTC-01 and phone
Before you can use your BTC-01, you must pair it with a device, for example,
a Bluetooth mobile phone. Mobile and BTC-01 can communicate as they are
turned on and within range of the phone up to 10 m (30 ft) outdoors or up to
5 m (15 ft) indoors with no solid objects in between.
1. Pairing with the BTC-01 and phone in close proximity.
2. When BTC-01 is on, press the volume button once to put it into pairing
mode. At the same time, you hear 4 hint sounds “ti-ti-ti-ti-” to inform you
are in pairing mode now and the BTC-01 indicator led illuminates. If you
want to cancel pairing, press volume button once.
Note. BTC-01 will automatically initiate a paired connection when powered on
and the last used device it was connected to. If you had paired with other
phone and you want to pair it with another one, please
press
volume
button once to disconnect the connection.
3.
Switching mobile phone into pairing mode to discover BTC-01, for detail
on device discovery for your phone, refer to the user guide for the phone.
4.
Select the BTC-01 from the discovered devices list and then confirm
following the on screen prompts.
5. Following the mobile user manual, entering the headset PIN code:
1234
Paired Link to additional Devices
BTC-01 can store pairing information for up to eight different devices
equipped with Bluetooth wireless technology. Devices are stored in a paired
Device list in memory in chronological order. When an attempt to pair to
more than eight devices is made, the oldest paired device is removed from
the list.
Any of the eight paired device can initiate a paired connection to the speaker.
