Page 4
Assemble the Frame
Attach the Headers to the Rails with 2-1/2" screws into the pilot holes through the Rails into the Headers. The Headers fit
inside the Rails. Make sure the bed is square. The easiest way to do this is to measure the diagonal from the top of one
end to the bottom of the other end. When the lengths are different you need to move the Headers and Rails to get both
values to be the same.
Attach the Bookshelf Headboard Legs to the Frame.
The
Headboard Legs are attached to the outside of the frame rail.
It is placed at the end of the rail and the rail rests on the inside
ledge of the leg.
Attach both headboard legs to the rail with 2-
1/2” screws into the pilot holes.
