background image

Page 1 

 

Classic Bookshelf Headboard Bed 

Assembly Instructions 

2/2/20 

 

This set of instructions includes the assembly for the Classic Bookshelf Headboard Bed and also includes the optional 
Slatted Footboard, Bookcase Footboard and Desk Footboard accessories.  Mattress is not included. 

 

 

Basic Bedframe Parts List:

 

(2) Rails     (2) Headers     (2) Short Footboard Legs 
(12) 2x3 Bed Slats     (2) 2x6 Bed Slats     (1) Parts Bag 
Please note if you ordered the optional Slatted Footboard you will not get 
the (2) Short Footboard Legs.   
 

Bookshelf Headboard Parts List

(2) Headboard Legs     (1) Top Shelf     (1) Middle Shelf 
(1) Front Panel     (1) Back Panel 
Please note that any piece labeled Left or Right is based on looking at the 
footboard end toward the headboard. 
 
 

 

Optional Slatted Footboard Parts List: 

(2) Footboard Legs     (3) 1x6 Footboard Slats     (1) ½” Spacer 
 
Please note that if you have a mattress thicker than 12” then you will get  
(4) Footboard Slats. 
 
 
 
 
 
 
 

 

Optional Bookshelf Footboard Parts List

(2) Bookshelf Sides     (1) Top Shelf     (3) Interior shelves 
(2) Bookshelf Footboard Back Panels (upper and lower) 
(2) Notched Short Footboard Legs (installed at the end of the bed frame) 
 
 
 
 
 
 
 

 

 

Desk Footboard Parts List: 

(2) Bookshelf Sides     (1) Desk     (2) Interior shelves 
(2) Bookshelf Footboard Back Panels (upper and lower) 
(2) Notched Short Footboard Legs (installed at the end of the bed frame) 
 
 
 
 
 
 

 

 

Содержание Classic Bookshelf Headboard Bed









Отзывы: