ENGL
IS
H
8
A
B
6. Remove any debris that has become stuck in the brush.
7. Place the left-hand end of the roller over the drive peg.
8. Push the right-hand end of the roller down into the recess in the floor nozzle.
9. Refit the cover and lock it in place by sliding the release catch upwards.
Wheels
1. Threads or waste can fasten and become wound around the wheel axles and
prevent the wheels from turning.
2. Remove any fibres, threads or debris that have tangled around the wheel axles.
3. If the entangled debris cannot be reached or is too tightly entangled, it could be
easier to remove the wheels first.
4. Slide the release catch (A)
down and lift off the cover
(B).
5. Grip the right-hand end of the roller brush and
lift it out.
4. Detach the wheels from the floor nozzle by carefully
prying them off with a screwdriver.
5. Remove any debris that has fastened around
the wheel axle.
6. Refit the wheels by pushing them onto the floor nozzle.
1. Remove any fibres, threads or debris that have tangled around the roller brush.
2. If the entangled debris cannot be reached or is too tightly entangled, it could be
easier to remove the roller blade to clean it.
3. Place the floor nozzle upside down on a level surface.
