E
N
G
LI
S
H
Weight reading
Weighing unit
Weighing unit
selector
Battery
compartment
Battery
compartment
3. Display
The display shows the load weight and selected weight units.
Reset
If the display behaves abnormally or if the scale does not shut itself off it may need
to be reset to the original factory settings: Remove the batteries and wait at least a
few seconds before replacing them.
4. Select weighing units
The scale has a selector button on the bottom that can be used to select weighing
units in: kg – st – lb. Each press of the button selects the next weighing unit.
5. Operation
1. Place the scale on a firm, even surface (avoid placing the scale on a mat or
other soft surface).
2. Carefully mount the scale with your weight evenly distributed between both
feet. Remain stationary until the display shows a steady reading for a few
seconds. The display will flash once when weighing is complete.
Automatic shutdown
The scale automatically shuts off 10 seconds after you step off it.
