Coline 18-4655, Руководство пользователя, Страница: 6 / 32

ENGL
IS
H
6
Before initial use
1. Carefully unpack the parts and place them on a flat surface.
2. Wash all the detachable parts in warm soapy water. Never immerse the motor unit
into any type of liquid.
3. Allow all the parts to air-dry before reassembling them. Make sure that the mains
lead is not plugged into a live electrical socket.
Note: The strainer can be cleaned using the included small brush.
Preparing the fruit and vegetables
1. Hard, fibrous foods should be cut into small pieces, 3–5 cm in length and
1.5–2 cm in width.
2. Tough skin, peel, stalks and seeds, pips should be removed before juicing.
3. Never juice frozen foods or ice.
4. Never juice sugar cane, coconut or cereals without first soaking them in water to
soften them.
5. Do not try to juice too much food at a time.
Assembly
1. Place the juice bowl (7)
onto the motor unit
(11) so that the
▼
and
▲ symbols line up
with each other. Push
the bowl down and twist
it clockwise until it locks
and the
lines up with
the bottom arrowhead.
2. Make sure that it is tight.
The juicer will not start if
the bowl is not locked in
position.
3. Make sure that the sluice
flap is fitted correctly in
the pulp spout (8).