background image

The air cleaner element  needs to be 

cleaned  or replaced  periodically (see 

chart for  cleaning/replacement 

intervals).   The air filter element will need 

to be cleaned more often if Mini Bike is 

ridden in muddy, wet, or dusty conditions.  

A clean air filter will help the Mini Bike run 

at peak performance allowing better gas 

mileage, more power and will protect the 

engine from the damaging effects of dirt 

entering the  engine.       

Clean air filter frequently if Mini 

Bike is driven in wet, muddy or 

dusty conditions.

Driving in the above conditions 

without cleaning frequently can 

plug up the air filter which can 

cause poor gas mileage,  low 

power and cause damage to the 

engine.  

CAUTION

Air filter removal, inspection 

and cleaning instructions

1,  Locate the air filter assembly (1) 

2.  Open the Air filter assembly cover  (2) 

by unhooking tab on underside of cover. 

3.  Remove the air filter element (3) from 

the assembly

3.  Clean foam element with mild soap 

and water.   Rinse and squeeze out excess 

water and allow to dry .

 Note:  If foam element (4) is damaged, 

replace. 

4.  Place a small amount of air filter oil on 

foam element  and work into the foam.   

Ring out excess oil.   Note:  Be careful not 

to damage (tear) filter while cleaning or 

oiling 

5.  Once air filter has been cleaned and 

oiled, re-install 

1

2

Air Filter

MAINTENANCE

18

3

4

Содержание Powersports CT200U






































Отзывы: