background image

Models: PMD8137

PMD8142 
PMD8143

Owner’s Manual

Controls and Components: 

Battery and AC Charger 

 

1. Battery with Release Buttons On Each Side (PMD8137 comes with 2 batteries)    

2. 1 Hour “Quick Charge” Charging Stand with LED Charging Indicators

Drill:                                                                                      

 

3. 3/8” Jacobs Keyless Chuck 

 

4. 24 Adjustable Torque Settings Control Ring 

 

5. Forward/Lock/Reverse Switch   

6. High/Low Speed Switch 

 

7. Variable Speed Trigger Switch   

8. Accessory/Bit Holder 

9. RUBBERSUIT™  

(entire drill body is covered with  

smooth rubberized paint) 

Accessories:

 

10. 6 Various Screwdriver Bits 

11. 2” Extension Bar 

12. 2 Double Ended Screwdriver Bits 

13. 6 Various Drill Bits 

INSTRUCTIONS FOR USE:
Charging The Battery
THE BATTERY(IES) MAY NOT BE FULLY CHARGED FROM THE  

FACTORY.  READ ALL INSTRUCTIONS THOROUGHLY PRIOR TO FIRST 

USE.

The Drills covered by this manual use the same battery and battery charger.
Your Drill comes complete with a rechargeable battery, which we recommend 

that you fully charge before the first use.
Drill must be charged for 1 hour prior to first use.  After initial charge, allow  

approximately 1 hour to recharge your battery.  

      Recommended size of Extension Cord for Battery Charger

 

Length of Cord (Feet) 

25 

50 

100 

150

 

AWG Size of Cord* 

18 

18 

16 

14            

*The smaller the AWG (American Wire Gauge) number of the extension cord, 

the higher the capacity of the cable for conducting current to ensure proper  

usage of the tool. 
7. Do not operate charger with a damaged cord or plug.
8. Do not operate the charger if it has received a sharp blow, been dropped or 

damaged in any other way. 

9. Do not open the drill, battery or battery charger. There are no user serviceable 

parts. Opening the unit will void the warranty.

10. Unplug the charger from its power source when not in use. 
11. Do not touch the terminals inside the battery charger with any other metal 

object such as nails or coins. This can short the charger.

12. Do not store the unit in areas where the temperature can exceed 120°F.
13. Do not throw the battery or battery charger in fire. This can cause an  

explosion.

14. 

WARINING: 

 Batteries vent hydrogen gas and may explode in the presence 

of a source of ignition, such as a pilot light.  To reduce the risk of serious 

personal injury, never use any cordless product in the presence of an open 

flame.  An exploded battery can propel debris and chemicals.  If exposed, 

flush with water immediately for a minimum of 10 minutes and seek  

medical attention.

15. During extreme conditions, the battery may leak.  This does not indicate a 

battery failure.  However, if the liquid gets on your skin, immediately wash 

with soap and water, neutralize the area with a mild acid such as lemon 

juice or vinegar.  If the liquid gets into your eyes, flush them with clean 

water immediately for a minimum of 10 minutes and seek medical  

attention.  

3

4

8

3

4

5

6

7

1

9

10

11

12

13

2

1

Содержание PMD8142







Отзывы: