manualshive.com logo in svg

Coleman OUTFITTER 700-L, Руководство пользователя

Поделиться
Скачать
Coleman OUTFITTER 700-L Скачать руководство пользователя страница 5

!

WARNING

The first part will identify a POTENTIAL HAZARD.

The second part will describe WHAT COULD HAPPEN if the 

warning or caution is ignored.

The third part will describe HOW TO AVOID THE HAZARD.

CAUTION

or

This manual is based on the latest product information available at the time

of publication. Coleman Powersports has a policy of continually  improving its products.  Due to 

improvements, or other changes, there may be some discrepancies.  We reserve the right to make 

product changes at any time, without notice and without incurring any obligation to make the 

same or similar changes to vehicles previously built or sold.

Coleman Powersports is concerned about the environment  and believes in conserving and pro-

tecting all natural resources.   For this reason , owners should recycle, trade in, or dispose as 

appropriate, batteries, oil and tires. 

Содержание OUTFITTER 700-L

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды