Coleman OUTFITTER 550, Руководство по сборке

Страница: 4 / 11

STEERING WHEEL INSTALLATION
Steering wheel
Center Horn
Clamp ring
Horn wire
Connector
Tools needed:
4mm - Allen Head Wrench
1. Install horn in steering wheel and attach horn
wire (located in the steering column) to back of
horn.
2. Install steering wheel with large open area on
top portion of steering wheel, facing up.
3. Insert and loosely tighten top and bottom
bolts in steering assembly
Top and Bottom
Bolts
Rotate steering column to
line up holes 2 O,Clock and
8 O,Clock
4 . Rotate steering collar (piece directly behind
steering wheel, on the column) and install allen
bolts at 2 o’clock and 8 o’clock position through
the clamp ring
.
Note: If these 2 bolts are not installed the
steering collar will rotate freely
and the bolts
w ill not be secure. .
5 . Install remaining bolts through the clamp
ring and tighten all securely.
Line up
Steering Column
Note: Before steering wheel install, make sure
the front tires are straight and in line with the rear
tires.
Uninstall the 6 - M5X20 allen bolts and clamp
ring from the steering column.
3