Connect Frame to Tent
–Insert one pin into the end of main tent
pole at tent corner. (illus. 3, illus. 4)
–Go to opposite end of pole and
gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the pole end.
–Repeat for second pole.
–Insert pin into the end of side pole, go to
opposite end of pole and apply pressure
until you arch the pole and can insert the
pin into the pole. (illus. 3, illus. 4)
–Repeat for other side pole.
–Tie top frame tie. (illus. 5)
CRESTLINE
™
9’10”x7’
1
Layout & Positioning
of Tent, Pole Assembly
–Layout and position tent with door
facing desired direction. (illus. 1)
–Unzip door.
–Stake down tent corners only, using the
stake loops. Keep the floor taut.
(Intermediate loops will be staked later.)
–Assemble frame poles by interlocking
shock-corded poles. (four poles)
–Insert the poles into pole sleeves.The
longer black poles should cross forming
an “X” in the middle of tent. The shorter
side gray poles insert into sleeves
running front to back. (illus. 1)
2
When You Are Ready To Set
Up Your Tent
–Select a level campsite clear of
rocks, branches and other hard or
sharp objects.
–Do not set up your tent under trees.
–For best results in windy conditions,
position the end of tent into the wind.
–See owners manual for more tips.
U Shaped
Rainfly Poles
Front door
Side poles
(Grey)
Assembled
poles
inserted
through
pole
sleeves
Instructions apply to Part Number 9277D107
illus. 1
illus. 2
Tent stake
through ring
on stake loop
illus. 4
Tent frame
set-up
Part No. 9277B102
Part No. 9277B103
Part No. 9277-104
illus.3
Insert pin into pole end
illus. 5
Frame tie
Rainfly
Part No. 9277D105
Main Tent Poles (Black)
Side Poles (Grey)
