background image

1,850W PORTABLE GASOLINE GENERATOR 

moving components causing equipment damage 

and/or personal injury. 
9. While in operation, keep all persons away from 

the immediate area surrounding your generator. 
10. Be sure all powered devices are shut off prior 

to connecting them to the generator. 
11. Keep the generator clean and well maintained 

at all times. 

12.  Be  sure  that  all  tools  and  appliances  are  in 

good  repair  and  are  properly  grounded.  Use 

devices  that  have  three  prong  power  cords.  If  a 

extension cord is used, be sure that it has three 

prongs for proper grounding. 
13.  Never  operate  the  generator  with  damaged, 

broken  or  missing  parts.  DO  NOT  operate  the 

generator while any of the protective shrouds or 

guards are removed. 
14. Do not refill the fuel tank while the engine is 

running. Use precautions to prevent fuel spillage 

during refills. Be sure the fuel tank cap is securely 

in place before starting the engine. Allow engine 

to cool for at least two minutes before refueling. 
15. Be sure to store gasoline in clean containers 

that do not contain water, dirt or rust because this 

will cause the engine to shut down. 

     

Never  operate  this  generator  in  an  explosive 

atmosphere,  inside  your  home  or  basement, 

or any other poorly ventilated area. 

Shut off the generator engine and disconnect 

the  spark  plug  wire  before  performing  any 

service or maintenance to the unit. 

OPERATION                            

PRE-OPERATION 

1. Check fuel level before starting your generator. 

Always  use  clean,  unleaded,  mid-to-premium 

grade gasoline for best results. Do not overfill and 

allow  some  space  at  the  top  of  the  tank  for 

expansion. 

We  recommend  that  you  use  unleaded  fuel 

because  it  produces  fewer  engine  and  spark 

plug deposits and extends the life of exhaust 

system  components.  Using  lower  octane 

gasoline  can  cause  persistent  “pinging”  or 

heavy  “spark  knock”  which,  if  severe,  can 

lead  to  engine  damage.  If  “spark  knock”  or 

“pinging”  occurs  at  a  steady  engine  speed 

under  normal  load,  change  brands  of 

gasoline.   

2. Check oil level before starting the engine. The 
oil level should be positioned between the lower 
and upper marks of the oil fill cap shown on Page 
4.

Never operate your generator under 

these conditions: 

Operate your generator only after 

you have: 

1. Rain or inclement weather 

2. Excessive vibration 

3. Sparking 

4. Electric output loss 

5. Changing or fluctuating engine speed 

6. Overheating in connected equipment 

7. Damaged receptacles 

8. Engine misfire 

9. Damaged, broken or missing parts 

10. Shrouds/guards removed 

1. Read and understand these 

    instructions 

2. Clear  immediate  area  of  all 

    persons 

3. Properly grounded the generator 

4. Properly grounded any tools 

    or appliances that you’ll be 

    operating 

5. Placed the generator on a flat, 

    level surface 

6. Placed the generator in a well- 

    ventilated area 

7. A 10-gauge copper wire 

- 3- 

Содержание CM04143N


















Отзывы: