5
4) Slowly loosen the tripod leg adjustment knobs and gently pull out the lower section
of each tripod leg. Tighten the knobs to hold the legs in place. Spread the tripod legs
apart to stand the tripod upright. Adjust the height of each tripod leg until the tripod
head is properly leveled. Place the accessory tray on top of the bracket and secure with
the included screws and locking wing nuts from underneath the tray.
(See Fig. 3 and Fig. 4 below)
(Fig. 4)
5) After the nuts and bolts have been firmly tightened, the telescope optical tube
assembly can be attached to the yoke. The tube slips between the two uprights of the
U-shaped yoke. When the tube is securely in position cover one of the large plastic
knobs into the threaded socket and tighten. Repeat on the other side. See Fig. 5.
(Fig. 5)
(Fig. 3)
