BAYSIDE
TM
6 TENT
MoDEl 2000005494
STITCH
LINE
12.
Attach frame clips along edges of tent to the Main & Side Poles. (Fig. 6)
13.
Locate the straps with toggle & loop above closet at back of tent.
Wrap strap around black Main Poles where they cross; then insert
toggle through loop to secure. (Fig. 7)
14.
Stretch tent until taut, then secure metal loops and web straps
located on all sides and corners of tent with stakes. (Fig. 8)
Pole Descriptions
Pole
Pole
Pole
Description
Qty. Dia.
Repair Kit Replacement Kit
Main Pole, black, thick
2
9.5mm 5010000540
5010000548
Front Pole, black with
green center insert
1
9.5mm 5010000540
5010000548
Side pole, black with
blue center insert
2
8.5mm 5010000541
5010000547
Rainfly Pole, black with
red center insert
1
8.5mm 5010000541
5010000547
6.
Insert end of Main Poles (black, thick) into pins located in the front
corners of the tent. (Fig. 2 & 4)
7.
Go to opposite end of each Main Pole and gradually apply pressure
to each forming arches. Insert the pin located at the outside corners
of the closet at the back of tent into each pole end. (Fig. 2 & 4)
8.
Insert end of each Side Pole (black with blue center insert) into pin
located on the sides of the tent. (Fig. 3 & 4)
9.
Go to opposite end of each Side Pole and gradually apply pressure
to form an arch. Insert the pin into pole end at the inside corners of
the closet. (Fig. 3 & 4)
(continued on other side)
Closet
Pin for
Main Pole (black,
thick) at outside
corners of closet
Pin for Side Pole (black
with blue center insert)
at inside corners of
closet
Fig. 4
Pin for Main Pole (black,
thick) at front
corners of tent
Fig. 2
Pin for Side Pole (black with
blue center insert) at sides
of tent
Fig. 3
10.
Insert end of Front Pole (black with green center insert) (above door)
into remaining pin located on the side of the tent. (Fig. 5 & 5A)
11.
Go to opposite end of Front Pole and gradually apply pressure to
form an arch. Insert the pin into pole end at the opposite side of
tent. (Fig. 5 & 5A)
Fig. 6
Fig. 8
Fig. 7
Front of Tent
Fig. 5
Door
5A
Front Pole (black with
green center insert)
above door
To Attach Rainfly
1.
Drape Rainfly over tent with maroon vestibule flaps located at the
front of the tent (see Fig. 9 on other side of this tag).
NOTE:
Hook and loop fasteners, located on seams of underside of
Rainfly, should be centered over black Main Poles.
Before you begin
Read all instructions before set up.
Select a level site clear of rocks, branches, and other hard or sharp objects,
•
to install your tent.
WARNING: Keep clear of overhead power lines
.
Do not set up your tent under trees because of potential lightning strikes or
•
falling tree limbs in inclement weather.
Secure with
•
all
stakes and guylines provided to prevent property damage or
personal injury.
For best results in windy conditions, position narrow end of tent into the wind.
•
Enlist the help of at least one other person to assist you when it is time to
•
assemble the tent.
To Set Up Tent
1.
Unfold tent and spread out on a clean, level surface with the door
facing the desired direction. (Fig. 1)
2.
Assemble all poles by interlocking the shock-corded,
sections together.
3.
Insert long, black Main Poles through the black trimmed sleeves on
top of tent forming an X”. (Fig. 1)
4.
Insert front pole with green center insert through the green
trimmed sleeve located above door. (Fig. 1)
5.
Insert shorter, black Side Poles with blue center insert through the
blue trimmed sleeves. (Fig. 1)
Fig. 1
Door
Front of Tent
Main Poles (black, thick)
Front Pole
(black with
green center
insert)
Side Pole (black with
blue center insert)
Side Pole (black with
blue center insert)
Closet
Pin for Side Pole
(black with
blue center
insert)
Pin for
Side Pole
(black with
blue center
insert)
Pin for Main Pole (black, thick)
Pin for Main Pole (black, thick)
3.
Insert end of Rainfly Pole into pin on either
side of front door. (Fig. 10)
4.
Go to opposite end of Rainfly Pole and
gradually apply pressure to form an arch.
Insert the pin into pole end at other side of
the door. (Fig. 10 & 13)
5.
Locate all hook & loop fasteners on
underside of Rainfly and wrap around all
Main Poles, Side Poles & Rainfly Pole to
secure. (Fig. 11)
2.
Insert the Rainfly Pole (black with red center insert) through sleeve with
red trim on underside of Rainfly above front door of tent. (Fig. 9)
Fig. 10
Fig. 11
Fig. 9
Sleeve with Red Trim
Rainfly Pole (black
with red center insert)
Rainfly
Front of Tent
Door
Vestibule Flap
Vestibule Flap
