will illuminate RED. It will turn off once the
internal battery is fully charged
.
Preserving the Waterproof Seal
Ensure that the attachment (either the arm or
suction cup base) is fully screwed into place. If
an attachment is not fully screwed into place,
then the CBT10TWS’ waterproof seal will be
compromised. Exercise extreme caution near
wet settings if no attachment is screwed on.
Locking the Flexible Arm into Place
To lock the CBT10TWS’ flexible arm into place,
loop the end of the arm through the open slot at
the arm’s base and twist the arm’s tip to the right
or left. This will ensure a tight lock.
Factory Reset
If you are experiencing connectivity issues, you
may need to perform a hard reset on your
CBT10TWS. To do so,
press the +/- buttons at
the same for six seconds. An audible tone will
sound after four seconds, followed by the LED
flashing blue after six seconds. Once reset
successfully, the LED indicator will flash every
two seconds and will enter pairing mode.
Specifications
Bluetooth Version: 4.1
Built-in Lithium-Ion Battery: 3.7V, 550mAh
Charging Voltage: 5V
Speaker: 40mm 4Ω 3W
Frequency: 60Hz-18KHz
Distortion: ≤0.5%
Effective Distance: 8M
Waterproof Grade: IPX7
Содержание AktivSounds CBT10TWS
Страница 1: ......
