Coleman 9988 Series, Инструкция по эксплуатации

Страница: 9 / 16

7. Observe the flame.
8. Flame should be blue with a hint of yellow
on tips.
English-8
INSTASTART™ Electronic
Ignition Skillet:
1. Remove skillet.
2. Make sure all valves are OFF.
3. Turn on the cylinder valve.
4. Push in and turn on the Skillet Control
Knob counterclockwise to HIGH, then
repeatedly press the igniter switch until the
flame ignites (Fig 14).
5. If ignition does not occur in 5 seconds, turn
the Skillet Control Knob off, wait 5
minutes, and repeat the lighting procedure.
6. If the burner does not light after trying
again, turn off Skillet Control Knob and try
match lighting the burner.
HINT: If the igniter fails to light the skillet
burner, adjust electrode tip with needle-
nose pliers. A spark must jump near a gas
opening in the burner when igniter is
activated. Use care not to damage the
ceramic insulator on electrode.
Fig. 14
Push
Repeatedly
Side Skillet Burner
Lighting
(cont.)
9. Adjust flame with the control knob (Fig. 15).
Match Lighting:
CAUTION
Use a LONG wooden match or a butane
lighter with an extension. Make sure all
burner controls are off except for the
burner being lighted. If a long-reach
match or lighter is not accessible, use the
match extension. The match extension is
located inside the doors. Remove the
cooking surface. Insert a match in the
holder end of the extension, strike and
place the burning match near the
BURNER being operated.
1. Remove skillet.
2. Make sure all valves are OFF.
3. Turn on the cylinder valve.
4. Strike and place the burning match
near the burner gas por t holes, then
push in and turn on the Skillet Control
Knob counterclockwise to HIGH (Fig. 16).
Fig. 15
Fig. 16
8. Adjust flame with the control knob (Fig. 17).
Fig. 17