11
PUMP MAINTENANCE
CAUTION:
YOU MUST ENSURE THE FILTER PUMP IS UNPLUGGED
BEFORE ANY MAINTENANCE BEGINS OR FACE SEVERE RISK OF INJURY OR
DEATH.
1) Unplug the Filter Pump.
2) Stop water flowing to the Filter Pump. (Refer to pool’s manual.)
3) Unscrew the Filter Cap Retainer and remove the Filter Cap.
4) Clean the Filter Cartridge with a garden hose.If filter cartridge remains soiled or
discolored, it is necessary to replace it with a new one.
5) Insert the cleaned (or new) Filter Cartridge; ensure it is centered in the Filter Pump.
6) Check that the Filter Cap Seal is in place.
7) Replace the Filter Cap and screw the Filter Cap Retainer into position.
8) Open the Valve A and B.
9) Follow the PUMP INSTALLATION DIRECTIONS section to prepare the system for use.
IMPORTANT:
To ensure pool water stays clean, please clean the filter
cartridge every day. For sanitary reasons, wesuggest replacing the Filter Cartridge with a
new one every two weeks.
PUMP STORAGE
1) Unplug the Filter Pump.
2) Stop water flowing into the Filter Pump and to remove the Filter Cartridge.
3) Discard the Filter Cartridge.
4) Detach all Hoses.
5) Dry all components thoroughly.
6) Store the filter pump in a dry location out of the reach of children. Storage
temperature: 4-40°C
（
39.2-104°F
）
7) Drain the pool according to the Pool Owner’s Manual.
PUMP WARRANTY
For information concerning pump warranty please visit our website at:
www.bestwaycorp.com
303021233056_90445E_14x21cm_
客专
2000galAPP
过滤泵说明书
_20N-OEM-481
