15
16
ASSEMBLY AND OPERATING INSTRUCTIONS
CAUTION
Failure to clean properly will cause the detergent injection system to
become clogged and inoperable.
CAUTION
Never use:
• Bleach, chlorine products and other corrosive chemicals
• Liquids containing solvents (i.e., paint thinners, gasoline, oils)
• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the unit and will damage the surface being
cleaned.
CAUTION
Drain gun assembly of any remaining water. Aim gun downwards and
squeeze trigger.
WINTERIZING AND LONG-TERM STORAGE
Optimum Winterizing Procedure
Winterizing your pressure washer will help protect and prolong its life. We strongly
recommend you follow the below steps using Pressure Washer Antifreeze (039-8602-0).
This will keep the internal parts lubricated, protected from rust, and prevents the pump from
freezing.
1. Connect the pump saver hose onto the adaptor and quick-connect coupling.
2. Depress button on top of pump saver container.
3. Continue until fluid exits the pressure hose.
4. Remove the hose from pump inlet.
Quick Winterizing Procedure
If you cannot do the Optimum
Winterizing procedure, you can still
protect your pressure washer from winter
damage by doing the below:
1. Disconnect all water connections.
2. Turn on the machine for a few seconds,
until the remaining water in the pump
exits. Turn off immediately.
3. Do not allow high-pressure hose to
become kinked.
4. Store the machine and accessories in
a room that does not reach freezing
temperatures. Do not store near
furnace or other sources of heat as it
may dry out the pump seals.
PUMP SAVER
Recommended: Pressure Washer
Antifreeze (039-8602-0)
