Coleman Powersports HS250UTV, Руководство пользователя

Страница: 42 / 67

Periodic Service
10-6
◆
Park the vehicle on a flat surface,
access the panel under the hood, set
the parking brake, and shut off the
engine.
◆
Check to see that the coolant level is
between the “FULL” and” LOW”
marks of recovery tank.
◆
When the coolant level drops due to
evaporation, add coolant only up to
the full level. In case of leakage add
anti-freeze and water in the specified
mixing ratio up to the full level.(see
flush cooling system and changing
coolant in EVERY 2 YEARS in
PERIODIC SERVICE section)
[1] Recovery tank
[2] FULL
[3] LOW
IMPORTANT
⚫
If the radiator cap has to be removed, follow
the cautions above and securely retighten the
cap.
⚫
Use clean fresh water and anti-freeze to fill
the recovery tank.
⚫
If water should leak, consult Coleman
Powersports Customer Support.
■
Cleaning radiator screen
CAUTION
TO avoid personal injury:
⚫
Be sure to stop the engine before
removing the screen
1. Park the vehicle on a flat surface,
2. Remove the radiator cover,
3. Detach the screen and remove all foreign
materials,
IMPORTANT
Radiator screen must be cleaned from debris to
prevent engine from overheating.
■
Checking brake fluid level
CAUTION
TO avoid personal injury:
⚫
Never operate the vehicle if the brake
fluid is below the minimum mark.
⚫
Use only DOT3 from a sealed container.
Other types of brake fluid may ruin
synthetic resin or rubber installed in
brake system components and may
cause brake failure.
⚫
Avoid contamination of the brake fluid
thoroughly by thoroughly cleaning
housing prior to removing the filler cap.
Do not open the brake fluid reservoir cap
unless absolutely necessary.
⚫
Use extreme care when filling the
reservoir. If brake fluid spills on the
power steering hose, wash it off with
water immediately, as brake fluid quickly
ruins synthetic resin or rubber hoses.