World Class Manufacturing in Car Wash Equipment
SUPER VAC 3 Installation/Operation Manual
Coleman Hanna Carwash Systems 93000/94000 Super Vac
Page 15 of 38 Rev. 2 7/12/10
Depress mode
– “W” will appear allowing you to program “Vac Run Time” when using
remote. Use mode to advance 1 digit at a time.
If not using Commander Remote C-1000
disregard this setting.
Program User Password. Program “PIN #” with Set Button move to next digit with mode
button.
Program Supervisor Password
– program “Supervisor Password” with Set Button – move to
next digit with mode button.
Timer is now programmed for use in the fragrance or fragrance/vac unit.
6.5.5 Shampooer and Shampoo/Vac Programming
Depress Mode Button until one of the following words appear: SHAMP, SVAC, Use “SET”
button to select desired function for programming.
Press mode again - the word DOM (Domestic-US) or INTR (International)
– Depress “Set”
button to select Nationality.
Press Mode again “T” will appear allowing you to program “Token” setting.
If you are using a separate coin acceptor for tokens
– use set button to program token value.
If you are not using tokens
– disregard this setting.
Depress mode again “A” will appear – allowing you to program “Turn-On Price” (i.e. $1.00 to
start) using set button each time it is pressed and released it advances $0.25 up to $5.00 for
turn-on.
Depress mode again “B” will appear allowing you to program “Time” (i.e. Base time 4:00
minutes) Using set button program time starting with minutes. When total minutes are set,
use mode button to advance to seconds :00. Press mode button to advance to next digit :00
Press mode again “C” appears allowing you to program bonus time or time received for
additional quarters. A $1.00 for 4:00 minutes additional quarter equal 1:00 minute
– using
mode will advance 1 digit at a time.
Press mode again
– the words “Switched” or “Non-Switched” will appear. Select “SET” to
selected desired mode.
Press mode again “S” will appear allowing you to program switch time. “Switched/Non-
Switched”. Switched if you are using shampoo that cost less than vacuum and you select
vacuum, the timer will require additional money be deposited and switched time is the time
allowed to make additional deposit or timer reverts to shampoo and times out. (i.e. time 30
seconds) Using set button program time starting with minutes. When total minutes are set,
use mode button to advance to seconds :00. Press mode button to advance to next digit
:00.
Depress mode again “D” will appear – allowing you to program “Secondary Base Cost” (i.e.
$1.00 to start) using set button each time it is pressed and released it advances $0.25 up to
$5.00 for turn-on.
Press mode again “E” appears allowing you to program secondary base time or time
received for additional quarters. A $1.00 for 4:00 minutes additional quarter equal 1:00
minute
– using mode will advance 1 digit at a time.
Press mode again “H’ will appear allowing you to program horn setting. Use set button to
advance one # at a time. Ten is a good number for this.