You can assign the proximity sensors with different functions for each working mode (the sensors will trigger
different operation for each working mode). The diagram presents sensors setup for the weighing mode.
In order to set left sensor function repeat steps 5 and 6, this time select Left Sensor parameter. Following the
above procedure you can also set sensors for remaining working modes.
9.3. Proximity sensors setup
1
2
3
4
5
6
Press "Parameters" button.
Select Weighing parameter.
Parameters list is displayed, select
Working Modes parameter.
Select Proximity Sensors parameter.
Select Right Sensor parameter.
Select function that is to be assigned to the
right proximity sensor.
Prior proximity sensors setup, log in as the Administrator.
