6
To prevent electronic overheat and potential fire,
do not
cover this product
when connected to the mains power supply.
Do not
obstruct or block the ventilation slots.
Only use an Earth screened mantle with electrically conductive vessels.
Do not
leave equipment switch on with empty glassware.
Do not
thermally insulate the exposed upper section of the vessel(s), as the
insulation used may obstruct the convection cooling airways around the rim of
the cartridge enclosure and cause the mantle to overheat
It is not recommended to leave any heating apparatus unattended
during operation.
The equipment is not spark, flame or explosion proof and has not been designed
for use in hazardous areas in terms of BSEN 60079-14:1997.
Keep flammable, low flash point substances away from the apparatus.
Do not operate or handle any part of the product with wet hands.
Do not
leave this product switched on without glass sides in place for
prolonged periods.
Keep the mains plug and lead set cable away from the heating apparatus being
controlled.
ATTENTION:
With high energy input and certain configurations of glassware in
EH-200 Series products, where the heating contact to glassware is relatively
small, localised heating and subsequent ‘bumping’ of the fluid being heated
may occur. Application advice should be sought from the manufacturer
