8 \ USER OPERATION MANUAL:
Cole-Parmer Basic Ductless Fume Hood Series
Power Cord:
» 1) For units intended to be operated at 120 volts (North America): Use a UL-listed and CSA-certified cord
set consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor cord, a maximum of 15 feet in
length and a parallel blade, grounding-type attachment plug rated 15 amperes, 125 volts.
» 2) For units intended to be operated at 230 volts: Use a cord set with a grounding-type attachment plug. The
cord set should have the appropriate safety approvals for the country in which the equipment will be installed.
3.3
Installing Your Cabinet
1.
Please refer to
Unpacking Your Cabinet - page 5
2.
Inspect your cabinet carefully. Should you find any defect please contact customer service.
3.
Peel off any protective masking that was left on the cabinet during manufacturing.
4.
Wipe down the interior and exterior of the cabinet with water or a mild household detergent.
5.
Connect cabinet to the main power supply and turn on the blower. Each cabinet requires its own dedicated
13A (230V) or 15A (115V) power outlet which should not be shared with other appliances.
WARNING!
Do not move the cabinet without observing the following precautions:
•
Observe the necessary precautions when relocating the cabinet, as it is heavy.
•
Warning - Tipping Hazard. Pushing high up on the unit may cause system to tip over. Be careful when
moving. Move with assistance only.
