background image

Warranty Information

Cold Jet® LLC (“CJ”) warrants its products (“Equipment”) provided under this 
Agreement to be free from defects in materials and workmanship for a period 
of 12 months, under normal use, maintenance and service as stipulated in the 
Operator’s Manual.  CJ warrants that the equipment will be in good working order 
on the Date of Shipment and will conform to CJ’s official published specifications.

The warranty period is 12 months for CJ manufactured Equipment.  Original 
Equipment Manufacturers’ warranties provided by CJ on equipment purchased 
under this Agreement not manufactured by CJ will be passed through to 
the Buyer.  The warranty period commences on the Date of Shipment of the 
Equipment.

CJ’s liability is limited to repairing or replacing, at its option, any covered part of its 
Equipment, which CJ has determined to be defective.  Said repair or replacement 
will be made by CJ or its authorized representative free of charge to the Buyer, 
except for any freight or travel expenses, during the warranty period.  Any 
replaced part will become the property of CJ.  If, after repeated efforts, CJ is 
unable to restore its Equipment to good working order, or to replace the defective 
parts as warranted, CJ may, at its discretion, replace the Equipment in its entirety.  
Any claim must be made to CJ, in writing, within 30 days of discovering the defect 
and any claim not made within that period shall be deemed waived or released, 
and thus denied.

Warranty service provided under this Agreement does not assume uninterrupted 
operation of the Equipment.  The suitability of the equipment for the purpose 
intended is not included in the warranty.

This warranty shall not apply and CJ shall be neither responsible nor liable for:
a) Consequential, collateral or special losses or damages;
b) Equipment conditions caused by abnormal conditions of use, accident, neglect 

or misuse of equipment, improper storage or damages resulting during shipment 
as determined by CJ;

c) The replacement of normal wear items, including but not limited to air, blast and 

whip end hoses;

d) Deviation from the Equipment’s prescribed maintenance programs, replacement 

parts, operating instructions, specifications or other terms of sale;

e) Labor charges, loss or damage resulting from improper operation, maintenance 

or repairs made by person(s) other than CJ or CJ-authorized service 
representatives;

f) Improper application of the product. In no event shall CJ be liable for claims in 

excess of the purchase price, whether there is a breach of contract or warranty 
claim of negligence or negligent manufacture.

THIS WARRANTY IS THE SOLE WARRANTY OF CJ AND ANY OTHER 
WARRANTIES, EXPRESS, IMPLIED IN LAW OR IMPLIED BY FACT, INCLUDING 
ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR 
USE, ARE HEREBY SPECIFICALLY EXCLUDED.

Содержание AeRO 75





















































Отзывы: