Cold Jet AERO 2 PCS 60, Руководство оператора

Страница: 25 / 32

42 43
Warranty
Cold Jet® (“CJ”) warrants its products (“Equipment”) provided under this Agreement to be free from defects in materials
and workmanship for a period of 12 months (90 days on used equipment), under normal use, maintenance and service
as stipulated in the Operator’s Manual, Commissioning, and Operator Training. At the discretion of CJ, failure to complete
Installation, Commissioning, and Operator Training shall result in forfeit of warranty rights. CJ warrants that the equipment
will be in good working order on the Date of Shipment and will conform to CJ’s official published specifications.
The warranty period is 12 months (90 days for used equipment) for CJ manufactured Equipment. Original Equipment
Manufacturers’ warranties provided by CJ on equipment purchased under this Agreement not manufactured by CJ will be
passed through to the Buyer. The warranty period commences on the Date of Shipment of the Equipment.
CJ’s liability is limited to repairing or replacing, at its option, any covered part of its Equipment, which CJ has determined
to be defective. Said repair or replacement will be made by CJ or its authorized representative free of charge to the
Buyer during the warranty period. Any replaced part will become the property of CJ. If, after repeated efforts, CJ is
unable to restore its Equipment to good working order, or to replace the defective parts all as warranted, CJ may replace
the Equipment in its entirety at its discretion. Any claim must be made in writing to CJ within 30 days after the defect is
discovered and any claim not made within that period shall be deemed waived or released and denied.
Warranty service provided under this Agreement does not assume uninterrupted operation of the Equipment. The
suitability of the equipment for the purpose intended is not included in the warranty.
This warranty shall not apply and CJ shall be neither responsible nor liable for:
A. Consequential, collateral or special losses or damages;
B. Equipment conditions caused by abnormal conditions of use, accident, neglect or misuse of Equipment, improper
storage or damages resulting during shipment as determined by CJ;
C. The replacement of normal wear items, including but not limited to air, blast and whip end hoses;
D. Deviation from the Equipment’s prescribed maintenance programs, replacement parts, operating instructions,
specifications or other terms of sale;
E. Improper application of the product.
In no event shall CJ be liable for claims, whether arising from breach of contract or warranty claims of negligence or
negligent manufacture, in excess of the purchase price.
THIS WARRANTY IS THE SOLE WARRANTY OF CJ AND ANY OTHER WARRANTIES, INCLUDING ANY WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR PARTICULAR USE, WHETHER EXPRESS OR IMPLIED BY LAW, FACT, COURSE OF
DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE, OR OTHERWISE, ARE HEREBY SPECIFICALLY EXCLUDED.
EU Declaration of Conformity
Original EN
This declaration is issued under the sole responsibility of the Cold Jet group:
Cold Jet, LLC
455 Wards Corner Road
Loveland, Ohio 45140 USA
Hereby declare the following product:
Product Designation: AERO2 PCS 60
Type/Serial Number: XXXX
Is in conformity with the Council Directives:
Directive 2006/42/EU Machine Directive
Directive 2014/30/EU EMC Directive
Directive 2014/35/EU Low Voltage Directive
Directive 2011/65/EU ROHS Directive
Directive 2014/53/EU Radio Equipment
Harmonized standards applied:
EN ISO 12100:2010 EN ISO 13732-3:2008 EN ISO 14119:2013
EN 60204-1:2006/A1:2009 EN ISO 13849-1:2015 EN ISO 14120:2015
EN 1037:1995+A1:2008 EN ISO 13850:2015 EN ISO 11202:2010
EN ISO 4414:2010 EN ISO 13857:2008 EN ISO 13732-3:2008
Person in the European Community authorized to compile the technical documentation:
Cold Jet Sp.zo.o, Product Development Manager Maciej Doczekała, Łukowska 12, Oborniki 64-600, Poland
Place and Date of Issue:
Loveland, USA on February 19, 2019
Signed for and on behalf of Cold Jet, LLC:
_______________________________________________________________
Arvid Nielsen
Director of Technology & Engineering, Sr. VP
2019.02.19 - AERO​
2​
Global Page 1 of 1