manualshive.com logo in svg

Cojali 50002002, Руководство пользователя

Поделиться
Скачать
Cojali 50002002 Скачать руководство пользователя страница 25

JT2002

Auto Range Multimeter
User Manual

25

⚠

 Warning

To avoid damages to the Meter or to the devices under test, disconnect circuit 

power and discharge all the high-voltage capacitors before testing for continuity.

To avoid harm to yourself, do not input higher than DC 60V or AC 30V voltages.

To test for continuity, connect the Meter as below:

1. Insert the red test lead into the Ω terminal and the black test lead into the COM 

terminal. 

2. Set the rotary switch to      and press BLUE button to select measurement mode.

3. The buzzer sounds continuously if the resistor to be tested is <10Ω.

The buzzer does not sound if the resistor to be tested is >35Ω.

Note

Open circuit voltage is around 0.45V

 

When continuity testing has been completed, disconnect the connection 

between the testing leads and the circuit under test, and remove the testing 

leads away from the input terminals of the Meter.

Содержание 50002002

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды