6
7 TABLE OF POSSIBLE ERRORS .
ERROR CODE
DESCRIPTION
Er1
Problems of storage with the current time
Er2
Bad connection in the probe (disconnected or cortocircuitada)
Er3
Internal EPROM memory problems
IMPORTANT:
- To prevent overheating, do not cover the radiator.
- If the power cord is damaged, it must be changed by the manufacturer, its after-sales service or persons qualified to
do so, in order to avoid possible danger.
- The radiator should not located just underneath an electrical connection.
- The radiator must be installed in such a way that any person in the bathtub or the shower not able to access switches
and other devices of implementation underway.
- This heating apparatus holds a specific amount of special gel. Repairs for which it is necessary to open the gel tank,
only must be made by the manufacturer or your service aftermarket which should normally contacted in case of
leakage of gel...
- A system of disconnection should be incorporated into the fixed pipe
.
- The appliance is not intended for use by persons (including children), whose physical, sensory or mental capabilities
are reduced, or lack of experience or knowledge, unless they have supervision or instructions relating to the use of
the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the radiator is discarded, follow the provisions concerning gel.
This product is in conformity with the Directive EU 2002/96/EC
The symbol of the "crossed trash" reproduced in the apparatus indicates that the product, at the
end of its useful life, should be treated separately from household waste, to a waste collection for
electrical and electronic equipment
The user is responsible for the correct disposal of radiator at the end of it’s lifespan.
