Coinco BillPro, Руководство по эксплуатации и обслуживанию

Страница: 13 / 26

13
SECTION 4: MAINTENANCE
Removing the Encoder/Sensor Housing
Board Assembly (see Figure 12)
Remove sensor housing by tilting up and away from
transport motor gear case assembly, then pull straight
out. Unplug harness connection.
Figure 12 Stacker/Encoder
Housing & Board
Assembly
Chassis
DISASSEMBLING THE CHASSIS
Removing the Pusher Plate from the
Chassis (see Figure 11)
Remove the pusher plate from the stacker gear box
assembly by slightly spreading the pusher plate until it
clears the stacker motor cam assembly. Pull the pusher
plate straight out until the locking tabs of the stacker
slides catch the chassis. Using a small screwdriver,
release the four tabs and remove the pusher plate.
Figure 11
Chassis
Locking Tabs
(both sides)
Locking
Tabs
Screwdriver
Stacker
Motor Cam