Cohu Electronics
5930 Series Thermal Camera User's Manual
Cohu Electronics
P
AGE
13
OF
17
3912 Calle Fortunada
San Diego, CA 92123-1827
Phone: 858-277-6700
Fax: 858-277-0221
lying inside the Camera must be plugged into header J2 as shown in Figure 6 (Figure 6 is drawn
without Transformer Support Plate and mating connectors for clarity).
Warning: Never power the Camera up with a connector plugged into headers J1 and J2
simultaneously. This may provide a risk of electric shock on the main rear panel
connector.
Figure 6 - Voltage Input Selection
3.
Camera Software Features
The Camera is equipped with a multitude of operational and configuration settings. See Table 9 for all
the software features available in this Camera.
Table 9 -Software Features
Camera Software Feature
Host Application
Control (C) or
Monitor (M)
Notes
Selection of up to 8 Operational Modes
C
Configured at factory.
Selection of up to 16 NUC Modes
C
Configured at factory.
Automatic Refresh on Operational Mode or NUC Mode
Switch
C
Automatic Refresh on Camera Boot
C
Automatic Refresh on Timer
C
Automatic Refresh on Camera Internal Temperature
Change
C
Commanded Refresh
C
Selection of up to 16 Video Color Palettes
C
Configured at factory but user can
create custom palettes. Contact
