Page 10 of 12
fearless
Installation guide
Step 2: WiFi setup
Open the following URL in your web browser (Chrome, Internet Explorer, etc.):
http://fearless.setup
or
http://192.168.8.1
If it is not possible to access the web browser, please try connecting to the
WiFi again. Then click on
„Select network“
, select your network and enter the
appropriate WiFi password. If your wireless network is not visible/selectable, the
signal is too weak to guarantee reliable data transmission. In this case, please use
a WiFi amplifier.
Now enter the serial number of your device. These can be found on the bottom of
the packaging (S/N: XX-XX-XX-XX-XX). Please wait 2-3 minutes and then check the
status of your device.
If there are any problems, make sure that you have entered your WiFi password
correctly and start again with step 1.
Note:
To connect your fearless system to a new WLAN, press the button on the housing for 1-3 seconds. Then,
as described in step 1, search for the appropriate wireless network and repeat the following steps.
Step 3: Check status
Now please check the status of your device. To do so, click on
„Check status“
or
enter the following address in your web browser: https://web.fearless-system.com
If the device is not „online“ after 5 minutes, please set up the device again, starting
with step 1.
Explanation of the status on the platform:
Initializing:
The device is preparing for start-up.
Active:
Sensor is in operation.
Inactive:
Operation was stopped / fall detection paused.
Online:
Device is connected to the Internet.
Offline:
Device is not connected to the Internet or the power supply.
Calibration error:
The ground floor cannot be detected by the sensor. Please
check the position and orientation of the sensor.
Visibility error:
The visibility of the sensor is limited. Please make sure that the view
of the sensor is not occluded by objects. (see page 5)
Sensor error/unexpected error:
Please contact the cogvis support team
(+43 1 236 058 0 or [email protected]).
Содержание fearless
Страница 1: ...cogvis at fearless Installation guide...
