Cognex VC5, Руководство по оборудованию

Страница: 11 / 49

Connectors and Indicators
Connector/Indicator Function
1 GigE Ports and
LEDs
The four GigE ports (GigE 1 - GigE 4) are 10/100/1000 RJ-45 ports that provide
Gigabit Ethernet connectivity to Cognex industrial GigE cameras and Cognex
displacement sensors. These ports also provide power to the Cognex industrial
devices that support Power over Ethernet (PoE). The G1 - G4 yellow
LEDs illuminate to indicate that the corresponding Cognex industrial GigE camera
is receiving PoE from the vision controller. For more information, refer to
GigE
Ports on page 29 .
CAUTION : The vision controller's GigE ports provide power to Cognex
industrial devices that support Power over Ethernet (PoE); connecting third-
party PoE devices to these ports could damage the vision controller or the
third-party device.
2 LAN Ports and
LEDs The two LAN ports (LAN 1 and LAN 2) are 10/100/1000 RJ-45 Ethernet ports that
are used to connect the vision controller to an Ethernet network. The green LED
blinks when a network connection is detected. The yellow LED blinks when
network activity is detected. For more information, refer to
LAN Ports on page 30
.
3 VGA Port The VGA port is an analog DB15 connector that provides connection to a
VGA monitor. For more information, refer to
VGA Port on page 31 .
4 USB Ports The three USB ports are USB 2.0 ports that can be used to connect HID devices
(mouse, keyboard or mass storage device). For more information, refer to
USB
Ports on page 31 .
5 SENSOR Ports
The two SENSOR ports (SENSOR 1 and SENSOR 2) are DB15 ports that provide
power, encoder and trigger connections to Cognex DS1000 series sensors via
the Power and I/O cable. For more information, refer to
SENSOR Ports on page 32
and Power and I/O Cable Specifications (DS1000 Only) on page 37 .
Note : The SENSOR ports are not supported with the DS900 series sensor.
11
Introduction