Cognex In-Sight 3400, Руководство пользователя

Страница: 68 / 90

Configuring Microsoft Windows Network Settings
6. Click the “Use the following IP address” radio button (Figure A-2). The IP address, Subnet
Mask, Default Gateway, Preferred DNS server and Alternate DNS server fields, which are
grayed-out, become active.
Figure A-2: Select Network Protocol Dialog
7. Enter an appropriate IP address.
8. Enter an appropriate Subnet Mask. The Subnet Mask defines which part of the sensor’s IP
address refers to the network and which part refers to the host. The network part of the IP
address is the same for all hosts on the same subnet, and the remainder is unique to each
host. The default Subnet Mask setting of 255.255.255.0 is usually appropriate. See Table
2-3 or consult your network administrator for more information.
NOTE Consult your network administrator to determine your Preferred DNS server and
Alternate DNS server.
9. Click OK.
10. Click Close, then restart Windows if prompted to do so.
56