Cognex In-Sight 3400 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 90

background image

Installing the In-Sight

®

3400 Vision Senso

r

CAUTION

Never connect the 1450 I/O Expansion Module to a power source other than
24VDC. Any other voltage creates a risk of fire or shock and can damage the
hardware. Do not connect the 24VDC source to any terminals other than the
2-pin 24VDC power connector.

2.5 Adding the Sensor to a Network Using the In-Sight 3400

GUI

The In-Sight 3400 sensor is ready to be installed as a network host once it has power and is
physically connected to the network.

NOTE

If the Microsoft "Media Sense" feature, which automatically detects whether or not your
network interface is linked to a network, is enabled when running Microsoft Windows
2000 or XP, communication with an In-Sight sensor may not be established. It is
recommended to use a hub or switch with a standard Ethernet cable to configure the
In-Sight sensor or configure your PC to disable the Media Sense feature. See Microsoft
Knowledge Base article 239924 for details on this process.

As previously described, there are many possible In-Sight network configurations. The specific
procedure for adding an In-Sight 3400 sensor to a network depends on whether or not a Dynamic
Host Configuration Protocol (DHCP) server is available. The DHCP server automatically assigns
the In-Sight 3400 sensor a network IP address and Subnet Mask.

NOTE

When installing the In-Sight 3400 sensor to an existing network, consult your network
administrator to determine whether a DHCP server is available.

2.5.1 Installing to a DHCP Network

The In-Sight 3400 sensor is pre-configured for an existing network with a DHCP server. After
connecting the Network cable and supplying power, the DHCP server will automatically detect
the In-Sight 3400 sensor, configure its settings, and add it to the network.

NOTE

After adding an In-Sight 3400 sensor to a network with a DHCP server, disabling DHCP
on the sensor and assigning it a static IP address is strongly recommended. For more
information, refer to the Network Settings topic in the

In-Sight

®

Explorer Help

file.

For an In-Sight 3400 sensor connected to a network with a DHCP server, a user can configure
only the Host Name, Host Table, FTP, Time and Advanced settings. A Host Name is an "alias"
for the In-Sight 3400 sensor’s IP Address, and appears in any list of host names in the In-Sight
interface. If you do not enter a new Host Name, the In-Sight 3400 sensor will appear on the
network with the default Host Name. Refer to the

In-Sight

®

Explorer Help

file for information

concerning other settings.

After adding the In-Sight 3400 sensor to the network using DHCP, proceed to “Verifying the In-
Sight 3400 Sensor Network Connection” (page 22).

17

«
...
27
28
29
30
31
...
»

Содержание In-Sight 3400



























































































Отзывы:

Нет отзывов

Похожие инструкции для In-Sight 3400

Бренд: FeiYu Tech Страницы: 5

Бренд: FEIYUTECH Страницы: 19

Бренд: FeiYu Tech Страницы: 25

Бренд: FEIYUTECH Страницы: 16

Бренд: i-onik Страницы: 6

Бренд: Omega Engineering Страницы: 2

Бренд: Oki Страницы: 52

Бренд: U-Line Страницы: 3

WaterGuard CM2300

Бренд: Mobeye Страницы: 32

Бренд: PROAIM Страницы: 3

Бренд: UBEXi Страницы: 16

DGIPOD-4655 - DATASHEET FOR IPHONE

Бренд: I.SOUND Страницы: 1

Бренд: GATmatic Страницы: 13

Бренд: RECARO Страницы: 20

ORBISPHERE 31 9 Series

Бренд: Hach Страницы: 150

Бренд: Ikelite Страницы: 28

Бренд: Baumer Страницы: 3

Бренд: EEZ RV Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды