Cognex In-Sight 1000, Инструкция по установке

Страница: 12 / 46

Section: 1: Introduction Installing In-Sight™ 1000 Series Vision Sensors
4
To install multiple In-Sight 1000 sensors onto a standalone In-Sight network, use an
Ethernet switch between the In-Sight 1000 sensors and the In-Sight PC Host or
In-Sight 3000 sensor. Make all connections via standard, straight-pinned CAT5 cable
(Figure 1-3 and Figure 1-4).
Figure 1-3: PC – Multiple In-Sight 1000s Network
Figure 1-4: In-Sight 3000 – Multiple In-Sight 1000s Network
The number of In-Sight sensors and In-Sight Hosts that may be installed on a
standalone In-Sight network are limited only by the number of ports available on the
Ethernet switch. To expand a standalone In-Sight network, add Ethernet switches as
needed to increase the number of available ports.