Cognex DataMan 50, Краткое руководство пользователя

Страница: 2 / 20

Precautions
To reduce the risk of injury or equipment damage, observe the following precautions
when you install the Cognex product:
l
Route cables and wires away from high-current wiring or high-voltage
power sources to reduce the risk of damage or malfunction from the
following causes: over-voltage, line noise, electrostatic discharge (ESD),
power surges, or other irregularities in the power supply.
l
Changes or modifications not expressly approved by the party responsible
for regulatory compliance could void the user’s authority to operate the
equipment.
l
Ensure that the cable bend radius begins at least six inches from the
connector. Cable shielding can be degraded or cables can be damaged or
wear out faster if a service loop or bend radius is tighter than 10X the cable
diameter.
l
This device should be used in accordance with the instructions in this
manual.
l
All specifications are for reference purposes only and can change without
notice.
l
This product is intended for industrial use in automated manufacturing or
similar applications.
l
The safety of any system incorporating this product is the responsibility of
the assembler of the system.
l
This product does not contain user-serviceable parts. Do not make
electrical or mechanical modifications to product components.
Unauthorized modifications can void your warranty.
2