39
PROGRAMMING
®
enter the 4-digit password which is programmed in the “4.4 Totals PIN”
menu item;
the YES option permits the data delete and the Coin Mechanism new start;
with the NO option the display shows the main menu item;
choose the option and press Enter.
4 Security
[Operator (
)]
This menu permits to manage 3 different user profiles. The submenu foresees the following items:
•
4.1 Operator PIN (
);
•
4.2 User PIN (
);
•
4.3 Technician PIN (
);
•
4.4 Totals PIN.
The
PIN
term stands for "Personal Identification Number" and is a 4-digit protection code to access
the programming menu.
The PIN permits the Coin Mechanism to identify the user profile which is accessing the
programming, enabling thus the right profile.
The operator profile has the maximum enabling level (see the introduction to programming at the
beginning of this chapter). To enable the PIN request it is enough that at least one of the 3 codes is
different from [0000] (default data). If all the codes are equal and null [0000] all the programming
and control functions will always be enabled.
4.1 Operator PIN
(
)
It is a code, consisting of 4 digits, which permits to define the operator profile, which gives
access to the whole programming menu (
). As a default the data set is 0000.
<
Set the first number of PIN by acting on the keys
<< >>
;
press the
Enter
key to confirm the data and set the following number.
4.2 User PIN
(
)
It is a code, consisting of 4 digits, which permits to define the user profile, which gives access to
those parts of menu which require an ordinary maintenance (
). As a default the data set is
0000.
4.3 Technician PIN
(
)
It is a code, consisting of 4 digits, which permits to define the technician profile, which gives
access to those parts of menu which are up to the technician (
). As a default the data set is
0000.
4.4 Totals PIN
This code, consisting of 4 digits, enables the delete of partial totals by using the “3.3 Partial
Delete” menu item. If the PIN is set at zero, the menu item 3.3 is not available. As a default the
data set is 0000.
<
Press the Enter key;
enter the PIN by using the
<< >>
keys;
press the
Enter
key to confirm the data.
In order to change the existing PIN:
press the Enter key;
on the display is shown the message: "Enter Old PIN";
enter the old PIN by using the
<< >>
keys;
Operator PIN
[0***]
Totals PIN
[0***]
