COFFEtek JAVA, Руководство оператора

Страница: 9 / 20

COFFEtek LTD
9 JAVA OPERATORS GUIDE 56574-2
(4) Remove the impellor disk B by pulling it in the
direction shown.
(5) Remove the whipper seal C and ensure that the
running surface D is smooth and free of
ingredient residues.
(6) Inspect whipper seal for damage and replace as
necessary.
(7) Wash all the removed mixing system
components in destaining fluid and then rinse
thoroughly with clean water.
(8) Reassemble the mixing systems by following
the reverse procedure. Ensure that whipper
seal
C is tight against the running surface
before refitting the impellor.
(9) Ensure that both locking pegs E on the mixing system are correctly located by
pressing firmly on the lower part of the mixing system.
(10) When all mixing system components have been refitted, switch on the machine
and perform a flush operation. Check the mixing systems for leaks and listen
for abnormal sounds that may indicate incorrect assembly.
B
C
D
E