Coffeemaxx 239451, Инструкция по эксплуатации

Страница: 25 / 56

25
5. The brewing or grinding procedure now starts at the set time.
Tip: You can also start the grinding or brewing procedure at any time before the set
starting time. To do this, press the Programm button once to switch off the timer
and then press the An/Aus button to start the grinding or brewing procedure
manually.
6. After the brewing procedure, you can take the glass pot from the hotplate and serve the
coffee.
7. After the brewing procedure, the hotplate remains on for another two hours and then
switches off automatically.
8. If you would like to turn off the coffee machine before the two hours are up, press the
An/Aus button.
9. Clean the device after use as described in the "Care and Descaling" section.
Changing Water Filter
To produce a more aromatic coffee flavour, the device has a water filter which is inserted
in the water reservoir. If the symbol is shown on the display, the water filter should be
replaced. You can order new water filters in our online shop (see "Ordering Replacement
Parts" section).
1.
Open the water reservoir cover and pull out the water filter by its bracket.
2. Open the lower part of the water filter bracket, take out the
water filter and dispose of it.
3. Insert a new water filter and then close the water filter
bracket again.
4. Place the water filter bracket back into the water reservoir.
Make sure that the water filter is seated correctly in the slot
in the water reservoir.
5. To delete the symbol on the display, press the
Kaffeestärke
button and the
2-12 Tassen
button simultaneously.
The absence of a water filter does not stop the device from working properly.
01113_DE-GB-FR-NL_V2.indb 25 11.02.11 08:18