Coffee Queen Grinder original Скачать руководство пользователя страница 20

Страница: 20 / 84

FILTERBREW & SERVING CONCEPT

LEVEL CONTROL

TEMPERATURE CONTROL

SHOWN ON THE

DISPLAY

POSSIBLE FAULT

POSSIBLE

SOLUTION

- The high water level

sensor is triggerd
before the low level
sensor.

- Clean the level sensor.
- Replace.
- Cables connected is

incorrectly.

- The machine fills slowly.
- Poor water pressure.
- Water connection tap

is not open

- Check water

connection.

- Restart machine.

SHOWN ON THE

DISPLAY

POSSIBLE FAULT

POSSIBLE

SOLUTION

- Temperature sensor

out of range.

- Temperature sensor is

broken.

- Cable loose.

- 5

C - 105

- Replace temperature

sensor.

- Check cables.

- Heating time too long.
- Solid state broken.
- Element broken.
- Overheating guard

tripped or broken.

- Restart the machine.
- Replace element.
- Replace solid state.
- Check overheating

protection.

Remove the power
cord from the wall
socket during any
installation work.

POSSIBLE SOLUTION

Cater, Tower, HVA/HVM

IMPORTANT!

All maintenance
and installations
must be done
of an authorized
technician.

Fault and solution

Содержание Grinder original





















































































Результаты поиска

Содержание Grinder original

Отзывы:

Coffee Queen Grinder original, Техническое руководство, Страница: 20 / 84

Результаты поиска

Содержание Grinder original

Отзывы: