12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
21
.
8. Cleaning and maintenance. WEEKLY
Eminence hot´n´cold TT
Dismantling; Cleaning or exchanging coffee filter.
A tool for dismantling the coffee filter, comes with the machine.
Prolonged contact
with cleaning agent may damage the screen assembly. Once this is done,
the screen should then be thoroughly rinsed with dish soap and warm water to remove any
leftover residue.
8.
Remount the screen assembly and close the door. Then the machine will return to start
position and the machine is ready for use.
If machine not will go back in start position. Restart machine!
1.
Push
”+ button”
for 6 seconds.
2.
After 6 seconds the display shows; ”Change paper/ Rotate”
”Push E/+”.
3
.
Push ”E” button.
4
.
The display shows;
”Preparing paperload”.
5
. The machine will rotate in position.
6
. When the display shows,”Change paper” open the door
and insert the dismantling tool through the brewer spout all
the way to the back of the cylinder, then slide it up until
contact is made with the screen assembly.
Push up on the rear of the screen assembly until it pops out
of the cylinder.
7.
Soak the screen assembly in a solution of 25gr. cleaning
agent. 3dl water for a maximum of 10 minutes.
.
10 minutes
.
3 dl water
97º Celsius
Fig. 2.
Fig. 1.
A
Fig. 3.
(Cleaning agent is supplied by your retail dealer)
Cleaning agent: (brew mechanism)
Coffee Queen article no 1104161
Filter: (brew mechanism)
Coffee Queen article no 47200213
Tool: (dismantling filter)
Coffee Queen article no 4720090
1.
3.
Cleaning of coffee filter
Dismantling coffee filter
