12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
20
.
8. Cleaning and maintenance.
CQ Future BTC
1.
2.
Dismantling and cleaning coffee filter.
A tool dismantling the coffee filter, comes with machine.
1.
Push
”+ button”
for 6 seconds.
After 6 seconds the display shows;
”Change paper/ Rotate” ”Push E/+”.
2
.
Push button for drink 2.
The display shows;
”Preparing paperload”.
The machine will rotate in position.
When the display shows,
”Change paper” open the
door and insert the dismantling tool (A) through the
brewer spout all the way to the back of the cylinder, then
slide it up until contact is made with the screen assembly.
Fig. 1.
Push up on the rear of the screen assembly until it pops
out of the cylinder.Fig. 2.
3.
Soak the screen assembly in a solution of 25gr. cleaning
agent in 3dl water for a maximum of 10 minutes.Fig. 3.
3
.
10 minutes
.
3 dl water
97º Celsius
Fig. 2.
Fig. 1.
Fig. 3.
(Cleaning agent is supplied by your retail dealer)
(A)
4.
Remount the screen assembly and close the door. Then the machine will
return to start position and the machine is ready for use.
If machine not will go back in start position. Restart machine!
5.
Make a cup of coffee and throw it out.
To make sure that there is nothing left of detergent.
Prolonged contact
with cleaning agent may damage the screen assembly. Once this is
done, the screen should then be thoroughly rinsed with dish soap and warm water to remove
any leftover residue.
Cleaning agent: (brew mechanism)
Coffee Queen article no 1104161
Filter: (brew mechanism)
Coffee Queen article no 47200213
Tool: (dismantling filter)
Coffee Queen article no 4720090
