(B)
12
.
Disassemble blender system. Cleaning once a day.
6. CLEANING:
Cleaning once a day
4. Loosen the mounting
plate.Turn the lever
counter clockwise (D) until
it stops.
(C)
(A)
(D)
5. Clean with a damp
cloth and wipe dry.
6. Wash these parts
A. Mixing bowl
B. Steam trap
C. Mixer
D. Mounting plate
1.Turn the lever(A)
counter clockwise.
2. Loosen the blender cup
Pull straight out (B).
3. Loosen the mixer
(C) by pulling it
straight out.
Note:
All parts must be dry before being remounted.
Reassemble the blender system.
7. Replace the mounting plate
by turning the lever (E) clock-
wise.
CHECK
the washers.
(E)
8. The level side of the mixer
motor shaft should line up
with the marking on the mixer
(F).
(F)
9. Mount the mixer, and press until you hear a
clicking sound. Follow the mixer's indicator,
arrow (G).
The mixer can only be mounted in this way.
(G)
10. Press in the blender cup
as shown (H) and lock
with the lever (I).
(H)
(I)
