Rev 3 Coffee Crafters -| Assembly and Installation
13
INSTALLING THE HOPPER
Once you have attached your mast and hood you are ready to attach the hopper to the hopper mount
support.
With a paper towel and the can of silicone lubricant, spray a thin layer of silicone on the face plate, catching
the drips and evenly coating the base plate.
Likewise spray the metal hopper key and disc on the back of the hopper, making sure to catch the drips.
You are now ready to mount the hopper on the hopper mount.
Facing the hopper mount, hold the hopper with both hands turning the hopper to your left. You will line up
the back of the hopper key with the keyhole on the back of the hopper mount plate as shown in the photos
below. Once the key is inserted into the keyhole, allow the hopper to slide downwards and turn it to the
right into an upright position, lifting slightly to sit the hopper on the roast chimney.
