CF 7 H
ard
E
dge
X
utilises a Philips MSR 700/SA lamp of 700W with a GY 9,5 lamp base. The lamp is available from your
authorised
coemar
sales agent.
coemar cod.
105089/1
wattage
700 w
luminous flux
54.000 lm
colour temperature
5600° K
base
GY 9,5
approximate life
500 ore
The fixture’s internal temperature can reach 250° C after 5 minutes, with a maximum peak of 350° C; ensure that the lamp
is cold prior to attempting removal. The fixture should be allowed to stand and cool for 10 minutes prior to its removal.
MSR/SA lamps are part of the mercury vapour family of discharge lamps and must be handled with great care. The lamp
operates at high pressure, and the slight risk of explosion of the lamp exists if operated over its recommended life of 500
hours. We recommend, therefore, that the lamp be replaced within the manufacturer’s specified lamp life.
installing the lamp
1) Using a Phillips head screwdriver,
remove the screws (
A
) which hold
the lampholder in place, located at
the rear of the projector head.
2) Remove the lampholder assembly (
B
).
3) Locate the lampholder (
C
).
4) Insert the lamp. The lamp used is manufactured
from quartz glass and should be handled with care;
always adhere to the instructions supplied in the
lamp’s packaging. Never touch the glass directly,
use the tissue provided in the lamp’s packaging. The
GY 9,5 lampbase is assymetrical in construction, with
one lamp pin socket larger than the other; make
sure therefore that the correct pin is lined up into its
respective pin socket. DO NOT USE UNDUE FORCE.
In case of difficulty, re-read the instructions and
repeat the procedure.
Attention
Turn off the power prior to opening up the unit..
4. Lamp: Installation and replacement
English
