Home (/) > Knowledge Base - Home (/knowledgebase/)
> KA-01088
Prin
The KitLock is a smart card locker lock and supports MIFARE based smart cards. Public and Private function
are available. When the lock is first powered, it will require initialisation.
Penalty Time
Touching an unregistered card 3 times will incur a 10 second time delay before any further use is possible.
Batteries
The KitLock uses 2x AAA 1.5v batteries. Always use high quality batteries and dispose of old batteries
according to local authority recommendations.
When battery power is low, the Red LED will flash 3 times before any unlocking. Batteries should be change
as soon as this happens.
During initialisation, select the most appropriate function for the application:
Private Use
or
Public Use
.
Private Use
This function is used when the lock is to be used by the same pre-registered users. Up to 50 individual User
Cards can be registered.
Public Use
Views: 1
KA-01088 ꞏ Customer Self-Service
https://support.codelocks.com/knowledgebase/article/KA-01088/en-us
1 of 6
6/22/2018 11:31 AM
